• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Solvent Kleene

Solvent Kleene

Non-Hazardous Degreasing and Paint Stripping Products

978-777-7860
[email protected]

  • Home
  • Products
    • Degreaser/Cleaners
      • D-Greeze 150D
      • D-Greeze 500
      • Tube & Pipe Degreaser
      • D-Greeze ES-LO
      • D-Greeze 1000
      • Electronic Flux Remover/Degreaser
    • Industrial Depainter
      • D-Zolve 319 Room Temperature Powder Coat Dissolver
      • D-Zolve 1012 Room Temperature Powder Coat Dissolver
      • D-Zolve 917 Low Temperature
      • D-Zolve 917 Multi-Purpose
      • D-Zolve 917 for Depainting Silicone Masking Plugs
      • D-ZOLVE 917 Extreme Heat Resistant Powder Coating Remover
      • D-Zolve 1220 for Spray/Brush-On Applications
      • D-Zolve Removes CARC – Chemical Agent Resistance Coating
      • D-Zolve 3251
      • D-Zolve 338 Thermoplastic Powder Coat Remover
      • D-Zolve 15-33IM Fast Acting Powder Coating Dissolver & Paint Remover
    • Aircraft Depainters
      • D-Zolve 15-33R Aircraft Depainter
      • D-Zolve 15-33IM Immersion Aircraft Depainter
    • Non-Slip Coatings Dissolvers
    • Electronic/Electrical Cleaners
      • D-Greeze ES-LO
    • Carbon Deposit Removers and Firearms Cleaners
      • D-Zolve 339
    • Wheel & Rim Restoration
      • D-Zolve 917 Low Temperature
      • D-Zolve 1012 Room Temperature Powder Coat Dissolver
  • About Us
  • Contact Us
D-Zolve 917 Paint, A-Coating, E-Coating and Powder Coating Stripper
  • Fast Acting at Low Temperatures 135°F/57°C
  • Non-Flammable and Non-Toxic
  • Compatible with Most Metals
  • Water Dilutable Concentrate
  • Minimal Odor
  • NSN Numbers Assigned by GSA
REQUEST A SDS

Need a Sample?

    If "Other" please put information in box below
  • Please let us know how we can help you.
  • This field is for validation purposes and should be left unchanged.

D-Zolve™ 917 Depaints E-Coating, Paints, Dissolves Powder Coating and Rust

D-Zolve™ 917 is a fast acting, safe paint and powder coating depainter. Designed for use in an immersion tank at low temperatures, D-Zolve removes paints and powder coatings, autophoretic and electrocoatings/E-coatings by penetrating the cured layers and breaking the bond between the coating and the substrate. D-Zolve 917 eliminates the need for costly burnoff, blasting or heating to high temperatures. D-Zolve 917 is a very effective solution for removing powder coating and wet paint buildups from hooks and racks. Performs at 135°F/57°C.

Easy to Use

D-Zolve 917's unique properties enable it to penetrate several layers of a coating when parts are immersed in the solution. Special additives enhance D-Zolve 917's ability to cling to and penetrate powder coatings. Once absorbed into a coating, D-Zolve 917 softens the finish layer, breaking the chemical bond that adheres these layers to the substrate's surface, causing the layers to delaminate and fall to the bottom of the immersion tank. D-Zolve 917 overcomes surface tension and other challenges that can make it difficult to remove powder coatings buildups from complex shapes.

While many strippers require heating to temperatures as high as 200°F to be effective, D-Zolve 917 needs a maximum temperature of 135-140°F. It eliminates the need for higher energy consumption and costly, time consuming, removal processes such as sand blasting and burnoff.

D-Zolve 917 is able to quickly remove cross linked coatings, epoxy primers, polyurethane top coats, powder coatings and other difficult to remove coatings without requiring any additional steps. Heating to 140°F and agitation of the D-Zolve 917 will facilitate the removal of difficult to strip coatings.

D-Zolve 917 can be diluted with water or used as a concentrate. Solids that drop to the bottom of the tank can be filtered out to extend the solution's useful life. Diluting and filtering help keep replenishment costs to a minimum.

Minimizes Health and Safety Hazards

Designed to minimize both health and environment risks, D-Zolve 917 is non-flammable, non-toxic and non-carcinogenic. It has a non-offensive, minimal odor and does not contain any ozone depleting components.

Material Compatibility

D-Zolve 917 can be used on a wide range of painted ferrous and non-ferrous metals including: aluminum, copper, brass, stainless steel and carbon steel as well as plastic and silicone substrates.

NSN 8010015790893 for 55 gal
NSN 8010015790894 for 250 gal

Footer

Transene Company, Inc.

Solvent Kleene Brand
10 Electronics Avenue
Danvers MA  01923

Tel: 978-777-7860
[email protected]

  • Contact Us
  • Request An SDS
  • Back to Top
  • Product Listing
 

Loading Comments...