 |
D-Greeze 500-LO
D-Greeze™ 500-LO is a non-hazardous, solvent-based high performance degreaser/cleaner that outperforms trichloroethane. Designed for room temperature cleaning, it rapidly penetrates and emulsifies oils and greases. It is non-toxic and non-flammable, and contains no halogens, chlorinated components, or terpenes. D-Greeze 500-LO is suitable for use with all ferrous and non-ferrous metals including aluminum, titanium, magnesium, copper, brass, carbon steels, and stainless steel.
Data Sheet D-Greeze Video (4:28 min)
|
|
| |
|
 |
D-Greeze 1000
D- Greeze™ 1000 is a quick drying, solvent-based cleaner which outperforms trichloroethane. It contains no SARA listed components, and is non-flammable and non-toxic. It quickly penetrates, emulsifies, and dissolves oils, greases, stamping oils, cutting oils, adhesive residue and flux. D-Greeze 1000 is suitable for use with all ferrous and non-ferrous metals including aluminum, titanium, magnesium, copper brass and stainless steels and carbon steels.
Data Sheet
|
| |
|
 |
D-Greeze ES
D-Greeze™ ES is a safe solvent-based cleaner/degreaser specially designed for applications where quick drying of parts and component surfaces is necessary. Drying time is comparable to that of Trichloroethane without any of the hazards and no organic residue. It does not contain any flammable components and has no flash point. It does not contain any Methylene Chloride, Carbon Tetrachloride, Phenols or Phosphates. D-Greeze ES also does not contain any HCFCs, Benzene or aromatic components.
Data Sheet
|
| |
|
 |
D-Greeze AC 2603 Aqueous
D-Greeze™ AC 2603 Aqueous is a new breed of aqueous degreaser/cleaner designed to remove a wide range of organic soils including greases, lubricating oils, drawing compounds and more. It is fast acting and usable in a wide range of dilution ratios. D-Greeze AC 2603 is rated for aircraft washing.
Data Sheet
|
| |
|
 |
Kleeneze 406 Cleaner and Protectorant
Kleeneze™ 406 offers one-step cleaning, rust protection and long-term film lubrication for metal surfaces. It was specially designed for applications where it is desirable to leave a thin film of lubricant on parts to provide improved lubricitiy and rust prevention on a surface following the degreasing process. Kleeneze can be safely used on firearms, bearings, tools, machine parts, screw machine products and other components machined from all ferrous and non-ferrous metals.
Data Sheet
|
| |
|
 |
Kleeneze 406 Firearm Cleaner and Protectorant
Kleeneze™ 406 is a non-hazardous, non-flammable cleaner that offers one-step cleaning, rust protection and film lubrication of firearm components. Its aggressive cleaning action lifts carbon deposits and other contaminants to facilitate cleaning. A thin film of lubricant coats each surface after cleaning to provide improved lubricity and rust prevention. When a parts washer is used, firearm components can be immersed in KIeeneze to minimize the need for scrubbing in dislodging difficult to remove soils.
Data Sheet |
| |
|
 |
D-Greeze AC 2603 Aqueous Anilox Roll Cleaner
D-Greeze™ AC 2603 removes dry ink buildup from laser engraved ceramic rolls, steel or chrome rools, and rubber printing plates and rolls. It can also be used to clean doctor blade chambers. D-Greeze AC 2603 is an aqueous concentrate which can be diluted with water at a ratio of 1:5 to dissolve water-based inks.
Data Sheet |
| |
D-Zolve 338 Anilox Roll Cleaner
D-Zolve™ 338 can be used to remove water based as well as solvent based inks. It can be used for either on or off-press cleaning. Cleaning with D-Zolve 338 on a regular basis can eliminate major cleanings as well as eliminate the need for ultrasonic cleaning, soda blasting, ice blasting and other cleaning methods.
Data Sheet
|
| |
|
